Dataset Search

Adey_Larson_Behavior.csv: Results of behavioral assays for rusty crayfish Faxonius rusticus collected from six lakes in Vilas County, Wisconsin in summer 2018. Crayfish_ID is an individual crayfish ID or identifier that matches to individuals in Adey_Larson_Isotope. Collection is how organisms were collected (trapped = baited trapping, snorkel = by hand). Lake is the study lake crayfish were collected from. Length is crayfish carapace length in mm. CPUE is crayfish catch-per-unit effort from baited trapping in that lake during summer 2018. Shelter_Occupancy, Exploration, Feeding_Snail, Feeding_Detritus, Feeding_Crayfish, and Aggressiveness are behavioral assay scores for individual crayfish. Shelter_Occupancy is frequency of observation intervals (12 maximum) in which crayfish were observed in shelter over a 12 hour period. Exploration is time for crayfish to explore a new area measured in seconds (maximum possible time 1200 seconds or 20 minutes). Feeding_Snail, Feeding_Detritus, and Feeding_Crayfish is the time for crayfish to take a food item (snail, detritus, or snail in the presence of another crayfish) measured in seconds (maximum possibe time 1200 seconds or 20 minutes). Aggressiveness is the response to an approach with a novel object scored as a fast retreat (-2), slow retreat (-1), no visible response (0), approach without threat display (1), approach with threat display (2), interaction with closed chelae (3), or interaction with open chelae (4). Three repeated aggressiveness measures were made per individual (Aggresiveness1, Aggresiveness2, Aggresiveness3), which were summed for inclusion in subsequent analyses (Aggresiveness_Sum). More detailed behavioral assay methods can be found in Adey 2019 Masters thesis. Adey_Larson_Isotope.csv: Stable isotope (13C, 15N) values for rusty crayfish Faxonius rusticus and snail or mussel primary consumers from six lakes in Vilas County, Wisconsin collected during summer 2018. Crayf is an individual crayfish ID or identifier that matches to the same individual crayfish in Adey_Larson_Behavior. Lake is the study lake. Collection is how organisms were collected (trapped = baited trapping, snorkel = by hand). Sample type indicates whether isotope values are for crayfish, snail, or mussel. d13C and d15N are stable isotope values.

Agriculture is the largest user of water in the United States. Yet, we do not understand the spatially resolved sources of irrigation water use by crop. The goal of this study is to estimate crop-specific irrigation water use from surface water withdrawals, total groundwater withdrawals, and nonrenewable groundwater depletion for the Continental United States. Water use by source is provided for 20 crops and crop groups from 2008 to 2020 at the county spatial resolution. These results present the first national-scale assessment of irrigation by crop, county, water source, and year. In total, there are nearly 2.5 million data points in this dataset (3,142 counties; 13 years; 3 water sources; and 20 crops). This dataset supports the paper by Ruess et al (2023) in Water Resources Research, https://doi.org/10.1029/2022WR032804. When using, please cite as: Ruess, P.J., Konar, M., Wanders, N. , & Bierkens, M. (2023). Irrigation by crop in the Continental United States from 2008 to 2020, Water Resources Research, 59, e2022WR032804. https://doi.org/10.1029/2022WR032804

This is a simulated sequence dataset generated using INDELible and processed via a sequence fragmentation procedure.

Data accompanying the article "Physics of Unraveling and Micromechanics of Hagfish Threads". Abstract of the article: Hagfish slime is a unique biological material composed of mucus and protein threads that rapidly deploy into a cohesive network when deployed in seawater. The forces involved in thread deployment and interactions among mucus and threads are key to understanding how hagfish slime rapidly assembles into a cohesive, functional network. Despite extensive interest in its biophysical properties, the mechanical forces governing thread deployment and interaction remain poorly quantified. Here, we present the first direct in situ measurements of the micromechanical forces involved in hagfish slime formation, including mucus mechanical properties, skein peeling force, thread–mucus adhesion, and thread–thread cohesion. Using a custom glass-rod force sensing system, we show that thread deployment initiates when peeling forces exceed a threshold of approximately 6.8 nN. To understand the flow strength required for unraveling, we used a rheo-optic setup to impose controlled shear flow, enabling us to directly observe unraveling dynamics and determine the critical shear rate for unraveling of the skeins, which we then interpreted using an updated peeling-based force balance model. Our results reveal that thread–mucus adhesion dominates over thread–thread adhesion and that deployed threads contribute minimally to bulk shear rheology at constant flow rate. These findings clarify the physics underlying the rapid, flow-triggered assembly of hagfish slime and inform future designs of synthetic deployable fiber–gel systems.

Weather data used in the survival (mark-recapture) analysis of Swainson's Thrushes crossing the Gulf of Mexico

The data set here include data from NMR, LC-MS/MS, MALDI-MS, H/D exchange MS experiments used in paper "A novel rotifer derived alkaloid paralyzes schistosome larvae and prevents infection".

Supplementary Material for article entitled: "Identifying marginal land for multifunctional perennial cropping systems in the Upper Sangamon River Watershed, Illinois". The material includes the methodology of GIS RUSLE model and details of the suitability analysis variables.

Landscape attributes of the nineteen sites as supplemental data for the following article: Bennett, A.B., Lovell, S.T. 2019. Landscape and local site variables differentially influence pollinators and pollination services in urban agricultural sites. Accepted for publication in: PLOS ONE.

Data for "Generic character of charge and spin density waves in superconducting cuprates". - Neutron scattering data for SDW - RSXS scans of CDW of LESCO x=0.10, 0.125, 0.15, 0.17, 0.20 at various temperatures. - Temperature dependence of CDW peak intensity, correlation length, Qcdw (Lorentzian fit, S(q,T) fit, Landau-Ginzburg fit) - XAS data of LESCO x=0.10, 0.125, 0.15, 0.17, 0.20

These are the responses to an open, convenience sample survey of residents of Illinois to understand their interactions with wild deer. The survey was available on REDCap between December 19, 2022 and December 19, 2023, and was publicized through listserves, Facebook groups, and media reporting. The file "COVID Deer Survey _ REDCap.pdf" contains the codebook for the survey, including the questions; all factor variables have ".factor" added to their name in the dataset. The file "DeerSurveyData.csv" contains the dataset. The file "Score_calculation_for_sharing.R" is the code to create the cleaned dataset used for analysis from the raw survey responses. Throughout, NA is used to represent null/not available/not applicable; this is most likely either a failure to answer the question or, in some cases, a question that was not presented as it is not relevant based on answers to previous questions.

This dataset was compiled between 2010 and 2011 from data published in the scientific literature from articles evaluating the influence of cropping systems and soil management practices on soil organic Carbon. We used the Thomas Reuter Web of Science database and by reviewed the reference sections of key peer-reviewed articles. Articles included in the database presented results from field sites within the continental United States.

File Name: AllWords.csv Data Preparation: Xiaoru Dong, Linh Hoang Date of Preparation: 2018-12-12 Data Contributions: Jingyi Xie, Xiaoru Dong, Linh Hoang Data Source: Cochrane systematic reviews published up to January 3, 2018 by 52 different Cochrane groups in 8 Cochrane group networks. Associated Manuscript authors: Xiaoru Dong, Jingyi Xie, Linh Hoang, and Jodi Schneider. Associated Manuscript, Working title: Machine classification of inclusion criteria from Cochrane systematic reviews. Description: The file contains lists of all words (all features) from the bag-of-words feature extraction. Notes: In order to reproduce the data in this file, please get the code of the project published on GitHub at: https://github.com/XiaoruDong/InclusionCriteria and run the code following the instruction provided.

This dataset contains RNASim1000, Cox1-Het datasets as well as analyses of RNASim1000, Cox1-Het, and 1000M1(HF).

These data were collected in 2018 and 2019 at the University of Illinois Energy Farm (N 40.063607, W 88.206926). During each growing season, bulk and rhizosphere soil were collected from replicate Sorghum bicolor nitrogen use efficiency trial plots at three separate time points (approximately July 1, August 1, and September 1). We measured soil moisture, pH, soil nitrate and ammonium, potential nitrification, potential denitrification, and extracted and sequenced the V4 region of the 16S rRNA gene for microbial community analysis. All microbial sequence data is archived in the National Center for Biotechnology Information’s (NCBI) Sequence Read Archive (accession number SRP326979, project number PRJNA741261).

Ammonia flux measurement data using flux gradient and relaxed eddy accumulation methods, and ancillary environmental data collected during the 2014 corn-growing season in Central Illinois, USA. This excel file contains two spreadsheets: one README sheet, and one sheet containing all data. These data were used in the development of the manuscript titled "Ammonia Flux Measurements above a Corn Canopy using Relaxed Eddy Accumulation and a Flux Gradient System."

Data used to estimate the survival of Swainson's Thrushes crossing the Gulf of Mexico.

Vendor transcription of the Catalogue of Copyright Entries, Part 1, Group 1, Books: New Series, Volume 29 for the Year 1932. This file contains all of the entries from the indicated volume.

The following files were used to reconstruct the phylogeny of the leafhopper subfamily Typhlocybinae, using IQ-TREE v1.6.12 and ASTRAL v 4.10.5. <b>1) Taxon_sampling.csv:</b> contains the sample IDs (1st column) and the taxonomic information (2nd column). Sample IDs were used in the alignment files and partition files. <b>2) concatenated_nt_complete.phy:</b> a complete concatenated nucleotide dataset used for the maximum likelihood analysis by IQ-TREE v1.6.12. The file lists the sequences of 248 samples with 154,992 nucleotide positions (intron included) from 665 loci. Hyphens are used to represent gaps. <b>3) concatenated_nt_complete_partition.nex:</b> the partitioning schemes for concatenated_nt_complete.phy. The file partitions the 154,992 nucleotide characters into 426 character sets, and defines the best substitution model for each character set. <b>4) concatenated_cds_complete.phy:</b> a complete concatenated coding DNA sequence dataset used for the maximum likelihood analysis by IQ-TREE v1.6.12. The file lists the sequences of 248 samples with 153,525 nucleotide positions (intron excluded) from 665 loci. Hyphens are used to represent gaps. <b>5) concatenated_cds_complete_partition.nex:</b> the partitioning schemes for concatenated_cds_complete.phy. The file partitions the 153,525 nucleotide characters into 426 character sets, and defines the best substitution model for each character set. <b>6) concatenated_nt_reduced.phy:</b> a reduced concatenated nucleotide dataset used for the maximum likelihood analysis by IQ-TREE v1.6.12. The file lists the sequences of 248 samples with 95,076 nucleotide positions (intron included) from 374 loci. Hyphens are used to represent gaps. <b>7) concatenated_nt_reduced_partition.nex:</b> the partitioning schemes for concatenated_nt_reduced.phy. The file partitions the 95,076 nucleotide characters into 312 character sets, and defines the best substitution model for each character set. <b>8) concatenated_aa_complete.phy:</b> a complete concatenated amino acid dataset used for the maximum likelihood analysis by IQ-TREE v1.6.12, corresponding to concatenated_cds_complete.phy. The file lists the sequences of 248 samples with 51,175 amino acid positions from 665 loci. Hyphens are used to represent gaps. <b>9) concatenated_aa_complete_partition.nex:</b> the partitioning schemes for concatenated_aa_complete.phy. The file partitions the 51,175 amino acid characters into 426 character sets, and defines the best substitution model for each character set. <b>10) concatenated_aa_reduced.phy:</b> a reduced concatenated amino acid dataset used for the maximum likelihood analysis by IQ-TREE v1.6.12, corresponding to concatenated_nt_reduced.phy. The file lists the sequences of 248 samples with 31,384 amino acid positions from 374 loci. Hyphens are used to represent gaps. <b>11) concatenated_aa_reduced_partition.nex:</b> the partitioning schemes for concatenated_aa_reduced.phy. The file partitions the 31,384 amino acid characters into 312 character sets, and defines the best substitution model for each character set. <b>12) Individual_gene_alignment.zip:</b> contains 426 FASTA files, each one is an alignment for a gene. Hyphens are used to represent gaps. These files were used to construct gene trees using IQ-TREE v1.6.12, followed by multispecies coalescent analysis using ASTRAL v 4.10.5 based the consensus trees with a minimum average bootstrap value of 70.

The effect of pesticide contamination on arthropod biomass and diversity in simulated prairie restorations depended on arthropod feeding guild (e.g., predator, herbivore, or pollinator). The pesticides used in this study were the neonicotinoid insecticide clothianidin and the phthalimide fungicide captan. This dataset includes two data files. The first contains information about the study sites ("plots") and pesticide treatments. The second contains information about arthropod biomass and morphospecies richness separated by feeding guild for each month-plot combination. R code in an R Markdown file for the analysis and data presentation in the associated publication is also provided. Detected effects included: predator biomass was 66% lower in plots treated with clothianidin, and this effect persisted across the growing season; the impact on herbivore biomass appeared to be inconsistent, with biomass being 51% lower with clothianidin in June but no detected difference in July or August; herbivore morphospecies richness was 12% lower in plots treated with both clothianidin and captain; pollinators appeared to be unaffected by clothianidin; and pollinator biomass increased by 71% when captan was applied to a plot.

Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

This dataset contains experimental measurements used in the paper, "Ultra-sensitivity of Numerical Landscape Evolution Models to their Initial Conditions." (to be submitted). The data is taken from experimental runs in a miniature landscape model named the eXperimental Landscape Evolution (XLE) facility. In this facility, we complete five >24hr runs at 5 minute temporal resolution. Every five minutes, an planform image was capture, and a digital elevation model (DEM) was generated. For each run, images and a corresponding animation of images are documented. In addition,ASCII formatted DEMs along with color hillshade maps were generated. The hillshade map images were also made into an animation. This dataset is associated with the following publication: https://doi.org/10.1029/2019GL083305

The bee visitation data includes the percentage of each bee pollinator group in bee bowls and observed. The data are referenced in the article with the following citation: Bennett, A.B., Lovell, S.T. 2019. Landscape and local site variables differentially influence pollinators and pollination services in urban agricultural sites. Accepted for publication in: PLOS ONE.

This dataset provides the raw data, code and related figures for the paper, "Anomalous Spin-Orbit Torques in Magnetic Single-Layer Films."

This dataset consists of all the figure files that are part of the main text and supplementary of the manuscript titled "Optical manipulation of the charge density wave state in RbV3Sb5". For detailed information on the individual files refer to the readme file.